AMSC / AMC
—
FSC 5990 × SYNCHRO,TRANSMITTER
SYNCHRO,TRANSMITTER
5990-01-016-0245
Open for bid
No open solicitations on record for this NSN right now.
Can you win it?
Restricted — approved sources only, based on the latest AMSC/AMC on record.
Competition
—
What it is — can you make it?
Dimensions, the FLIS specification requirements, and the manufacturer part numbers already qualified against this NSN.
Specifications
From the federal catalog (DLA FLIS / PUB LOG) — what your part has to meet. Cited specification documents can be looked up in ASSIST Quick Search ↗, DoD's public spec repository — copy the document number in.
| Requirement | Value |
|---|---|
| BODY STYLE AAQL | — |
| SHOULDER DIAMETER AAVH | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| PILOT DIAMETER AAVL | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| OVERALL LENGTH ABHP | INCHES MAXIMUM 3.9560 |
| FLANGE DIAMETER ABKK | INCHES MINIMUM 1.4320 |
| FLANGE THICKNESS ABKU | INCHES NOMINAL 0.0930 |
| UNDERCUT DIAMETER ABPA | INCHES NOMINAL 1.3120 |
| UNDERCUT WIDTH ABPC | INCHES NOMINAL 0.0780 |
| LENGTH ABRY | SHOULDER INCHES NOMINAL 0.1320 |
| SHAFT DIAMETER ABWV | SINGLE SHAFT INCHES NOMINAL 0.1872 |
| SHAFT LENGTH ABXF | SINGLE SHAFT INCHES NOMINAL 0.5550 |
| FRAGILITY FACTOR AFJN | MODERATELY RUGGED |
| MAXIMUM TEMP RISE AHCG | CELSIUS 20.0 |
| BODY SIZE AJSL | 15 |
| ROTOR INPUT VOLTAGE RATING IN VOLTS AJSR | NOMINAL 115.0 |
| FREQUENCY IN HERTZ AJSS | NOMINAL 60.0 |
| ROTOR INPUT CURRENT RATING AJST | MILLIAMPERES NOMINAL 22.0 |
| ROTOR INPUT ELECTRICAL POWER RATING AJSV | MILLIWATTS NOMINAL 360.0 |
| ZRO IMPEDANCE MAGNITUDE IN OHMS AJTG | MINIMUM 5335.00 AND MAXIMUM 6265.00 |
| ZRO IMPEDANCE ANGLE IN DEG AJTH | MINIMUM 80.00 AND MAXIMUM 83.00 |
| ZSS IMPEDANCE MAGNITUDE IN OHMS AJTN | MINIMUM 675.00 AND MAXIMUM 825.00 |
| ZSS IMPEDANCE ANGLE IN DEG AJTP | MINIMUM 11.00 AND MAXIMUM 16.00 |
| PHASE SHIFT ANGLE IN DEG AJVF | INPUT TO OUTPUT NOMINAL 7.000 |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT AJVG | OUTPUT 45.00 |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT AJVH | 90.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES AJVL | -6.0 TO 6.0 |
| TORQUE GRADIENT PER ANGULAR DEG AJVV | INCH-OUNCES MAXIMUM 0.050 |
| ALIGNMENT HOLE QUANTITY AJVW | 4 |
| PILOT LENGTH AJWQ | INCHES NOMINAL 0.0400 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE AJWX | INCHES NOMINAL 2.5230 |
| TERMINAL LOCATION CQTM | REAR |
| SHAFT SLOT DEPTH CQZS | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| SHAFT SLOT WIDTH CRHN | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| SHAFT TYPE CRSJ | SINGLE SHAFT ROUND, SLOTTED |
| ALIGNMENT HOLE DEPTH CRSY | INCHES MINIMUM 0.1250 |
| TRANSFORMATION RATIO CSJY | ROTOR TO STATOR NOMINAL 0.783 |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER CTCW | INCHES NOMINAL 1.1000 |
| TEST DATA DOCUMENT TEST | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| TERMINAL TYPE AND QUANTITY TTQY | WIRE LEAD 5 |
| SPECIFICATION/STANDARD DATA ZZZK | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 20 |
Manufacturer part numbers
Commercial part numbers cross-referenced to this NSN in the federal catalog — the parts that have been accepted as satisfying this stock number, and who makes them.
| Part number | CAGE | Manufacturer |
|---|---|---|
| 15CX6 | 13797 | ROCKWELL INTERNATIONAL CORP POWER TOOL DIV INDUSTRIAL AIR TOOLS |
| 15CX6 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
| 15CX6/20-02-C | 4H618 | MOOG INC. |
| 15CX6C/20-02C | 4H618 | MOOG INC. |
| AS20708/20 | 0VH01 | SAE CUSTOMER SERVICE DEPT 2045 |
| M20708/20-02C | 0U583 | SAE INTERNATIONAL DBA SAE INTERNATIONAL |
| M20708/20-02C | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
| M20708/20-02C | 99932 | MOOG INC. |
| M20708/20C-002 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
| MIL-S-20708/20 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
| SAE-AS20708/20 | 0U583 | SAE INTERNATIONAL DBA SAE INTERNATIONAL |
What it pays — so you can quote
The government's own price and demand record for this NSN — what past awards cleared at, so you know where to land your quote.
Latest unit price
—
Purchases
0
Total spend
—
—
Last purchased
—
Purchase records
—
Total demand
—
Latest award total
Price history
What the government paid per unit
Fewer than two priced purchases on record — see the table below.
Purchase history
No priced purchases on record for this NSN yet.
Related contract actions
Contract action totals, not unit prices — obligation amounts from USAspending for related awards, shown for context only. These do not appear on the price chart above.
No related contract actions on record.
Demand history
Every solicitation we've indexed for this NSN, open and closed — 1 on record. Closed RFQs (expired, cancelled, or awarded) stay here as a record of past demand; they never get removed.
| Solicitation | Issued | Closes / closed | Qty | Status | |
|---|---|---|---|---|---|
| SPE7M0-26-T-050X | Aug 20, 2026 | Aug 31, 2026 | 1 | Expired | View at DIBBS → |
Open RFQs on DIBBS → DIBBS award history ↗
About this data
- Unit prices: DLA DIBBS award records — every row links to its government record.
- AMSC: latest observed value from DIBBS solicitation history.
- Contract action totals: USAspending, context only.
- Full methodology →