Type a 13-digit NSN, a 9-digit NIIN, a manufacturer part number, or a category name such as “gasket”.

Jump to

FSC 5905 × RESISTOR,VARIABLE,NONWIRE WOUND,

RESISTOR,VARIABLE,NONWIRE WOUND,

5905-01-314-7221 FSC 5905

NSN 5905-01-314-7221 (also written 5905013147221; NIIN 01-314-7221) is a resistor, variable, nonwire wound in Federal Supply Class 5905, Resistors. 3 manufacturer part numbers from 1 supplier are on record. The government has 1 open solicitation for it.

Open for bid

1 open solicitation on record right now — quantity, close date, and where to submit.

Solicitation Qty Status
SPE7M5-27-T-1732 500 Closes in 2d Bid →

Can you win it?

This item is coded as suitable for competitive acquisition (AMC 1).

Acquisition method (AMC)
1
Suffix (AMSC)
T
Competition
Coded for competition

AMC 1: suitable for competitive acquisition, second or later time. AMSC T: handled under qualified products list procedures. The codes describe the item's status on record, not any one solicitation. What the codes mean

What it is — can you make it?

Dimensions, the FLIS specification requirements, and the manufacturer part numbers already qualified against this NSN.

Specifications

From the federal catalog (DLA FLIS / PUB LOG) — what your part has to meet. Cited specification documents can be looked up in ASSIST Quick Search ↗, DoD's public spec repository — copy the document number in.

Requirement Value
SECTION QUANTITY AAPN 1
BODY STYLE AAQL —
RELIABILITY INDICATOR AARG NOT ESTABLISHED
BODY DIAMETER ABPM INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516
SHAFT DIAMETER ABWV INCHES MINIMUM 0.122 AND INCHES MAXIMUM 0.126
SHAFT LENGTH ABXF INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.657
MOUNTING BUSHING LENGTH ADAP INCHES MINIMUM 0.234 AND INCHES MAXIMUM 0.266
BODY LENGTH ADAQ INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.493
SHAFT STYLE AEDX —
ACTUATOR TYPE AEFD SINGLE SHAFT
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION AEFH MINIMUM 292.0 AND MAXIMUM 298.0
MAXIMUM STARTING TORQUE AEFK INCH-OUNCES 6.00
MAXIMUM RUNNING TORQUE AEFL INCH-OUNCES 6.00
MAXIMUM STOP TORQUE AEFM INCH-OUNCES 48.00
NONTURN DEVICE RADIUS AEFP INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.250
FRAGILITY FACTOR AFJN MODERATELY RUGGED
SCREW THREAD DIAMETER AJYN INCHES MINIMUM 0.234 AND INCHES MAXIMUM 0.266
SCREW THREAD SERIES DESIGNATOR AJYP UNEF
SCREW THREAD QUANTITY PER INCH AJYQ 32.0
MOUNTING METHOD AXGY STANDARD BUSHING
FEATURES PROVIDED CBBL HUMIDITY PROOF AND PANEL SEAL AND SHAFT SEAL
CUBIC MEASURE CBME CUBIC INCHES 0.615
ELECTRICAL RESISTANCE PER SECTION CQCC KILOHMS SINGLE SECTION 25.0
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG CQCK MINIMUM 292.0 AND MAXIMUM 298.0
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT CQDB -55 DEG CELSIUS SINGLE SECTION -3.0 TO 0.0 AND -25 DEG CELSIUS SINGLE SECTION -5.0 TO 10.0 AND 25 DEG CELSIUS SINGLE SECTION -5.0 TO 10.0 AND 120 DEG CELSIUS SINGLE SECTION 0.0 TO 3.0
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER CQGN SINGLE SECTION 120.0
DEVICE DESIGN TYPE CQPH AT 10:30 OCLOCK NONTURN
DEVICE DESIGN TYPE CQPH AT 4:30 OCLOCK NONTURN
TERMINAL LOCATION CQTM REAR END
POWER DISSIPATION RATING PER SECTION IN WATTS CRGD FREE AIR SINGLE SECTION 0.25
RESISTANCE TOLERANCE PER SECTION IN PERCENT CRSS SINGLE SECTION -10.0 TO 10.0
ACTUATOR TRAVEL CONTROL FEATURE CRSX STOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER CSDH SINGLE SECTION 70.0
TEST DATA DOCUMENT TEST SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-94
TERMINAL TYPE AND QUANTITY TTQY TAB, SOLDER LUG 3
SPECIFICATION/STANDARD DATA ZZZK GOVERNMENT SPECIFICATION 81349--IL-R-94 TO 3

Manufacturer part numbers

Commercial part numbers cross-referenced to this NSN in the federal catalog — the parts that have been accepted as satisfying this stock number, and who makes them.

Part number CAGE Manufacturer
MIL-PRF-94/3 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-R-94/3 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RV6SAYSA253C 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

What it pays — so you can quote

The government's own price and demand record for this NSN — what past awards cleared at, so you know where to land your quote.

Latest unit price
—
Purchases
0
Total spend
—
—
Last purchased
—
Purchase records
—
Total demand
—
Latest award total

Compare with other items

Purchase history

No priced purchases on record for this NSN yet.

Related contract actions

Contract action totals, not unit prices — obligation amounts from USAspending for related awards, shown for context only. These do not appear on the price chart above.

No related contract actions on record.

Demand history

Every solicitation we've indexed for this NSN, open and closed — 1 on record. Closed RFQs (expired, cancelled, or awarded) stay here as a record of past demand; they never get removed.

Solicitation Issued Closes / closed Qty Status
SPE7M5-27-T-1732 Oct 30, 2026 Nov 9, 2026 500 Open View at DIBBS →

Open RFQs on DIBBS → DIBBS award history ↗

About this data

  • Unit prices: DLA DIBBS award records — every row links to its government record.
  • AMSC: latest observed value from DIBBS solicitation history as of Nov 1, 2026.
  • Contract action totals: USAspending, context only.
  • Full methodology →
Cite this page
Citation

NSN Explorer. "RESISTOR,VARIABLE,NONWIRE WOUND,." nsnexplorer.com, https://nsnexplorer.com/nsn/5905-01-314-7221/. Data as of November 7, 2026.

Link

https://nsnexplorer.com/nsn/5905-01-314-7221/