Acquisition method (AMC)
1
FSC 5905 × RESISTOR,VARIABLE,WIRE WOUND,NON
RESISTOR,VARIABLE,WIRE WOUND,NON
5905-00-947-5689 FSC 5905
NSN 5905-00-947-5689 (also written 5905009475689; NIIN 00-947-5689) is a resistor, variable, wire wound, non in Federal Supply Class 5905, Resistors. 6 manufacturer part numbers from 3 suppliers are on record. The government has 1 open solicitation for it.
Open for bid
1 open solicitation on record right now — quantity, close date, and where to submit.
| Solicitation | Qty | Status | |
|---|---|---|---|
| SPE7M5-27-T-0493 | 7 | Closes in 4d | Bid → |
Can you win it?
This item is coded as suitable for competitive acquisition (AMC 1).
Suffix (AMSC)
T
Competition
Coded for competition
AMC 1: suitable for competitive acquisition, second or later time. AMSC T: handled under qualified products list procedures. The codes describe the item's status on record, not any one solicitation. What the codes mean
What it is — can you make it?
Dimensions, the FLIS specification requirements, and the manufacturer part numbers already qualified against this NSN.
Specifications
From the federal catalog (DLA FLIS / PUB LOG) — what your part has to meet. Cited specification documents can be looked up in ASSIST Quick Search ↗, DoD's public spec repository — copy the document number in.
| Requirement | Value |
|---|---|
| SPECIFICATION/STANDARD DATA ZZZK | GOVERNMENT SPECIFICATION 81349--IL-R-22 TO 1 |
| BODY STYLE AAQL | — |
| RELIABILITY INDICATOR AARG | NOT ESTABLISHED |
| OVERALL LENGTH ABHP | INCHES NOMINAL 1.313 |
| BODY DIAMETER ABPM | INCHES NOMINAL 0.875 |
| SHAFT DIAMETER ABWV | INCHES NOMINAL 0.125 |
| SHAFT LENGTH ABXF | INCHES NOMINAL 0.625 |
| MOUNTING BUSHING LENGTH ADAP | INCHES NOMINAL 0.250 |
| BODY LENGTH ADAQ | INCHES NOMINAL 0.688 |
| OVERALL DIAMETER ADAV | INCHES NOMINAL 1.063 |
| SHAFT STYLE AEDX | — |
| ACTUATOR TYPE AEFD | SINGLE SHAFT |
| MAXIMUM STARTING TORQUE AEFK | INCH-OUNCES 6.00 |
| MAXIMUM STOP TORQUE AEFM | INCH-OUNCES 80.00 |
| NONTURN DEVICE RADIUS AEFP | INCHES NOMINAL 0.250 |
| SCREW THREAD DIAMETER AJYN | INCHES NOMINAL 0.250 |
| SCREW THREAD SERIES DESIGNATOR AJYP | UNEF |
| SCREW THREAD QUANTITY PER INCH AJYQ | 32.0 |
| MOUNTING METHOD AXGY | STANDARD BUSHING |
| ELECTRICAL RESISTANCE PER SECTION CQCC | OHMS SINGLE SECTION 250.0 |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG CQCK | MINIMUM 290.0 AND MAXIMUM 305.0 |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER CQGN | SINGLE SECTION 340.0 |
| DEVICE DESIGN TYPE CQPH | LOCATION NOT OTHERWISE SPECIFIED AT 6:00 OCLOCK |
| TERMINAL LOCATION CQTM | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| POWER DISSIPATION RATING PER SECTION IN WATTS CRGD | HEAT SINK SINGLE SECTION 12.5 |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT CRSS | SINGLE SECTION -10.0 TO 10.0 |
| ACTUATOR TRAVEL CONTROL FEATURE CRSX | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER CSDH | SINGLE SECTION 25.0 |
| TEST DATA DOCUMENT TEST | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22 |
| SECTION QUANTITY AAPN | 1 |
| TERMINAL TYPE AND QUANTITY TTQY | TAB, SOLDER LUG 3 |
Manufacturer part numbers
Commercial part numbers cross-referenced to this NSN in the federal catalog — the parts that have been accepted as satisfying this stock number, and who makes them.
| Part number | CAGE | Manufacturer |
|---|---|---|
| E250L01 | 44655 | OHMITE HOLDING, L.L.C. DBA OHMITE MANUFACTURING |
| M22/01-00171SB | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
| MIL-PRF-22/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
| MILR22-1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
| RP061SB251KK | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
| RP061SB251KK | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
What it pays — so you can quote
The government's own price and demand record for this NSN — what past awards cleared at, so you know where to land your quote.
Latest unit price
—
Purchases
0
Total spend
—
—
Last purchased
—
Purchase records
—
Total demand
—
Latest award total
Purchase history
No priced purchases on record for this NSN yet.
Related contract actions
Contract action totals, not unit prices — obligation amounts from USAspending for related awards, shown for context only. These do not appear on the price chart above.
No related contract actions on record.
Demand history
Every solicitation we've indexed for this NSN, open and closed — 1 on record. Closed RFQs (expired, cancelled, or awarded) stay here as a record of past demand; they never get removed.
| Solicitation | Issued | Closes / closed | Qty | Status | |
|---|---|---|---|---|---|
| SPE7M5-27-T-0493 | Oct 13, 2026 | Oct 23, 2026 | 7 | Open | View at DIBBS → |
Open RFQs on DIBBS → DIBBS award history ↗
About this data
- Unit prices: DLA DIBBS award records — every row links to its government record.
- AMSC: latest observed value from DIBBS solicitation history as of Oct 13, 2026.
- Contract action totals: USAspending, context only.
- Full methodology →
Cite this page
Citation
NSN Explorer. "RESISTOR,VARIABLE,WIRE WOUND,NON." nsnexplorer.com, https://nsnexplorer.com/nsn/5905-00-947-5689/. Data as of October 19, 2026.
Link
https://nsnexplorer.com/nsn/5905-00-947-5689/