Type a part name such as “lock washer”, a 13-digit NSN, a 9-digit NIIN, a manufacturer part number, or a category name.

Jump to

FSC 5905 × RESISTOR,VARIABLE,NONWIRE WOUND,

RESISTOR,VARIABLE,NONWIRE WOUND,

5905-00-556-3135 5905005563135 NIIN 005563135 FSC 5905

NSN 5905-00-556-3135 (also written 5905005563135; NIIN 00-556-3135) is a resistor, variable, nonwire wound in Federal Supply Class 5905, Resistors. 3 manufacturer part numbers from 1 supplier are on record. The government has 1 open solicitation for it.

Open for bid

1 open solicitation on record right now — quantity, close date, and where to submit.

Solicitation Qty Status
SPE7M5-27-T-2809 1 Closes in 5d Bid →

Can you win it?

Coded for competition, little award history No awards with a supplier are on record.

This item is coded as suitable for competitive acquisition (AMC 1).

Acquisition method (AMC)
1
Suffix (AMSC)
T
Competition
Coded for competition
Awards with a supplier (last 10)
0
Distinct winners
—
Current streak
—
Listed sources
1

AMC 1: suitable for competitive acquisition, second or later time. AMSC T: handled under qualified products list procedures. The codes describe the item's status on record, not any one solicitation. What the codes mean

Who manages it

The services and agencies that hold a management record for this NSN, and how each says it buys it.

Service or agency AMC AMSC Acquisition advice Manager Since
Department of the Army 1 T — HQ Defense Logistics Agency Enterprise Business Systems Retail: U.S. Army War Reserve Command 2006-04-01
Department of the Air Force 1 T — HQ Defense Logistics Agency Enterprise Business Systems Retail: Oklahoma City Air Logistics Center 2006-04-01
Department of the Navy 1 T — HQ Defense Logistics Agency Enterprise Business Systems Retail: Naval Inventory Control Point 2006-04-01
Also registered by 7 other governments

Brazil, Canada, Italy, Japan, Jordan, Republic of Korea, Turkey

Government supply record

This is the government’s catalog price for the item, not an award price. It is what a military unit is charged when it orders the item through the supply system, and it includes surcharges, so it is not what a supplier was paid. It is useful as a ceiling sanity check for a quote.

Government standard price
$3.25 per EA Catalog price, not an award price. Effective Oct 1, 2026
Shelf life
Not a shelf-life item
Source of supply
SMS Defense Logistics Agency

Shelf life codes: DoD Manual 4140.27, Volume 1, Table 1 (shelf-life codes).

What it is — can you make it?

Dimensions, the FLIS specification requirements, and the manufacturer part numbers already qualified against this NSN.

Catalog record

Identification codes the federal catalog (DLA FLIS) holds for this NSN, each with its plain-language meaning.

Assigned
Jan 1, 1963
DEMIL
A Low risk if released from DoD control; no demilitarization needed
Criticality
X No nuclear-hardened feature and no other critical feature
Hazardous material
N No Data in HMIRS
Precious metals
U Type/Content Is Unknown
Static/EMI sensitive
B Sensitive to electrostatic discharge (ESD)
Schedule B
8533400080 definition not on file

Also called: Knob Potentiometer; Pot, Nonwire Wound; Potentiometer; Potentiometer, Carbon Composition; Potentiometer, Cermet; Potentiometer, Metal Film; Potentiometer, Trimmer; Resistor, Trimmer

What these codes mean
Hazardous Material Indicator
Hazardous materials indicator code: a code established in the DLIS total item record (TIR) to identify to users of the federal catalog system all known or suspected hazardous items as defined by…
The Date the National Stock Number /NIIN/ Was Created
The date the national stock number /NIIN/ was created.
Precious Metals Indicator
Precious metals indicator code (PMIC): this code is to identify items that have precious metals as part of their content.
Schedule B Export
Taxonomy coded value code: the code that represents a specific taxonomy coded value.

DEMIL, criticality and static/EMI sensitivity are not in the catalog's own dictionary; their code tables are on the codes guide.

Standard drawing

This part is defined by a government standard or specification, and that document holds the real dimensioned drawing. Government documents are listed in ASSIST Quick Search, which needs no registration. Industry standards are sold by their publisher. We link to the official source and never host a copy.

  • MIL-PRF-94/5

    Military performance specification

    Open in ASSIST ↗ Type MIL-PRF-94/5 in the Document ID box. A government document, listed in ASSIST Quick Search, DoD's public document search.

ASSIST is run by the Defense Logistics Agency and may not load from outside the United States.

Specifications

From the federal catalog (DLA FLIS / PUB LOG) — what your part has to meet. Cited government specification documents can be searched by document number in ASSIST Quick Search ↗, DoD's public document search. ASSIST is run by the Defense Logistics Agency and may not load from outside the United States.

Requirement Value
POWER DISSIPATION RATING PER SECTION IN WATTS CRGD FREE AIR SINGLE SECTION 1.0
RESISTANCE TOLERANCE PER SECTION IN PERCENT CRSS SINGLE SECTION -10.0 TO 10.0
ACTUATOR TRAVEL CONTROL FEATURE CRSX STOPS
ACTUATOR TYPE AEFD SINGLE SHAFT
MAXIMUM STARTING TORQUE AEFK INCH-OUNCES 6.00
MAXIMUM STOP TORQUE AEFM INCH-OUNCES 128.00
NONTURN DEVICE RADIUS AEFP INCHES MINIMUM 0.515 AND INCHES MAXIMUM 0.547
TERMINAL LOCATION CQTM RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY TTQY TAB, SOLDER LUG 3
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER CQGN SINGLE SECTION 120.0
ELECTRICAL RESISTANCE PER SECTION CQCC KILOHMS SINGLE SECTION 25.0
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER CSDH SINGLE SECTION 70.0
TEST DATA DOCUMENT TEST SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-94
BODY DIAMETER ABPM INCHES MINIMUM 1.032 AND INCHES MAXIMUM 1.156
SPECIFICATION/STANDARD DATA ZZZK GOVERNMENT SPECIFICATION 81349--IL-R-94 TO 5
SCREW THREAD QUANTITY PER INCH AJYQ 32.0
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG CQCK MINIMUM 309.0 AND MAXIMUM 320.0
MOUNTING BUSHING LENGTH ADAP INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515
BODY LENGTH ADAQ INCHES MINIMUM 0.468 AND INCHES MAXIMUM 0.656
OVERALL DIAMETER ADAV INCHES MAXIMUM 1.515
SHAFT STYLE AEDX —
SHAFT DIAMETER ABWV INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251
SHAFT LENGTH ABXF INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.656
SECTION QUANTITY AAPN 1
BODY STYLE AAQL —
RELIABILITY INDICATOR AARG NOT ESTABLISHED
OVERALL LENGTH ABHP INCHES MINIMUM 1.062 AND INCHES MAXIMUM 1.312
SCREW THREAD SERIES DESIGNATOR AJYP UNEF
MOUNTING METHOD AXGY LOCKING BUSHING
SCREW THREAD DIAMETER AJYN INCHES NOMINAL 0.375

Manufacturer part numbers

Commercial part numbers cross-referenced to this NSN in the federal catalog — the parts that have been accepted as satisfying this stock number, and who makes them.

Part number CAGE Manufacturer
MIL-PRF-94/5 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILR94-5 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RV4LAYSA253C 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Earlier stock numbers replaced by this one

Older stock numbers the federal catalog cancelled in favour of this NSN, newest first. If you hold stock or an old requisition under one of them, this is the number to use now.

Earlier stock number Status of that number Effective
5905-00-642-4030 Cancelled-Use 2026-07-02
5905-00-683-7601 Cancelled-Use 2026-07-02

What it pays — so you can quote

The government's own price and demand record for this NSN — what past awards cleared at, so you know where to land your quote.

Work out your quote

Enter your own cost to see your price, margin and profit. Nothing you type is stored or sent anywhere.

Fill in either the margin or the price; entering one clears the other. Margin is a share of the selling price: (price − cost) ÷ price.

—
Your unit price
—
Margin
—
Profit per unit
—
Order total
—
Profit on the order

Government standard price: $3.25 per EA. This is the catalog price a military unit is charged, not an award price; treat it as a ceiling check for your quote.

Arithmetic on public award prices. It does not predict who will win.

Latest unit price
—
Purchases
0
Total spend
—
—
Last purchased
—
Purchase records
—
Total demand
—
Latest award total

Compare with other items

Purchase history

No priced purchases on record for this NSN yet.

Related contract actions

Contract action totals, not unit prices — obligation amounts from USAspending for related awards, shown for context only. These do not appear on the price chart above.

No related contract actions on record.

Demand history

Every solicitation we've indexed for this NSN, open and closed — 1 on record. Closed RFQs (expired, cancelled, or awarded) stay here as a record of past demand; they never get removed.

Solicitation Issued Closes / closed Qty Status
SPE7M5-27-T-2809 Nov 12, 2026 Nov 23, 2026 1 Open View at DIBBS →

Open RFQs on DIBBS → DIBBS award history ↗

About this data

  • Unit prices: DLA DIBBS award records — every row links to its government record.
  • AMSC: latest observed value from DIBBS solicitation history as of Nov 12, 2026.
  • Contract action totals: USAspending, context only.
  • Full methodology →
Cite this page
Citation

NSN Explorer. "RESISTOR,VARIABLE,NONWIRE WOUND,." nsnexplorer.com, https://nsnexplorer.com/nsn/5905-00-556-3135/. Data as of November 18, 2026.

Link

https://nsnexplorer.com/nsn/5905-00-556-3135/