Acquisition method (AMC)
1
FSC 3110 × BEARING,BALL,ROD END
BEARING,BALL,ROD END
3110-01-248-6246 FSC 3110
NSN 3110-01-248-6246 (also written 3110012486246; NIIN 01-248-6246) is a bearing, ball, rod end in Federal Supply Class 3110, Bearings, Antifriction, Unmounted. 25 manufacturer part numbers from 16 suppliers are on record. It was last purchased in Sep 2026.
Open for bid
No open solicitations on record for this NSN right now.
Can you win it?
This item is coded as suitable for competitive acquisition (AMC 1).
Suffix (AMSC)
T
Competition
Coded for competition
AMC 1: suitable for competitive acquisition, second or later time. AMSC T: handled under qualified products list procedures. The codes describe the item's status on record, not any one solicitation. What the codes mean
What it is — can you make it?
Dimensions, the FLIS specification requirements, and the manufacturer part numbers already qualified against this NSN.
Specifications
From the federal catalog (DLA FLIS / PUB LOG) — what your part has to meet. Cited specification documents can be looked up in ASSIST Quick Search ↗, DoD's public spec repository — copy the document number in.
| Requirement | Value |
|---|---|
| THREAD CLASS AAJD | 3B |
| THREAD DIRECTION AAJF | RIGHT-HAND |
| SHANK DIAMETER AAZE | INCHES MINIMUM 0.3650 AND INCHES MAXIMUM 0.3850 |
| SHANK STYLE AAZF | — |
| OVERALL LENGTH ABHP | INCHES MINIMUM 1.7455 AND INCHES MAXIMUM 1.7855 |
| BORE DIAMETER ABXV | INCHES MINIMUM 0.1897 |
| OVERALL OUTSIDE DIAMETER ADGA | INCHES MINIMUM 0.7710 AND INCHES MAXIMUM 0.7910 |
| SHANK THREAD LENGTH AGGY | INCHES MINIMUM 0.7188 AND INCHES MAXIMUM 0.7812 |
| OUTER RING WIDTH AGVT | INCHES MINIMUM 0.3180 AND INCHES MAXIMUM 0.3380 |
| INNER RING WIDTH AGVU | INCHES MINIMUM 0.4950 AND INCHES MAXIMUM 0.5000 |
| LENGTH FROM BORE CENTER TO SHANK END AGXH | INCHES MINIMUM 1.3650 AND INCHES MAXIMUM 1.3850 |
| SEAL QUANTITY AGYJ | 2 |
| BEARING SEAL TYPE AGYW | CONTACT |
| ALIGNMENT TYPE AGZA | SELF-ALIGNING |
| SELF-ALIGNMENT LOCATION AHAW | INTERNAL |
| THREAD QUANTITY PER INCH CMLP | 28 |
| NOMINAL THREAD SIZE CQJX | INCHES 0.250 |
| SELF-ALIGNMENT ANGLE CTLK | DEGREES NOMINAL 10.00 |
| LUBRICATION MATERIAL LBMA | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION LMDC | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATERIAL MATT | OVERALL STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION MDCL | INNER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MATERIAL DOCUMENT AND CLASSIFICATION MDCL | SEAL ASSN STD SINGLE MATERIAL RESPONSE A-S365 OR ASSN STD SINGLE MATERIAL RESPONSE A-S3666 |
| MATERIAL DOCUMENT AND CLASSIFICATION MDCL | OUTER RING MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| MATERIAL DOCUMENT AND CLASSIFICATION MDCL | BALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 |
| MATERIAL DOCUMENT AND CLASSIFICATION MDCL | ROD END BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| SURFACE TREATMENT SFTT | OUTER RING CADMIUM |
| SURFACE TREATMENT SFTT | ROD END BODY CADMIUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION STDC | ROD END BODY FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 1,CLASS 2 QQ--416 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION STDC | OUTER RING FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 1,CLASS 2 QQ--416 |
| STYLE DESIGNATOR STYL | — |
| THREAD SERIES DESIGNATOR THSD | UNIFIED NATIONAL JOINT FINE (UNJF) |
Manufacturer part numbers
Commercial part numbers cross-referenced to this NSN in the federal catalog — the parts that have been accepted as satisfying this stock number, and who makes them.
| Part number | CAGE | Manufacturer |
|---|---|---|
| 3110001735073 | A00AM | E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES |
| 502092 | R1120 | SATAIR A/S |
| 712015 | D9893 | LIEBHERR-AEROSPACE LINDENBERG GMBH |
| AN951RE3F4 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE |
| AN951RE3F4MILG3278A | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE |
| AS21153 | 0U583 | SAE INTERNATIONAL DBA SAE INTERNATIONAL |
| AS21153 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| AS6039/2 | 0U583 | SAE INTERNATIONAL DBA SAE INTERNATIONAL |
| AS6039/2 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| BACB10A450 | 81205 | THE BOEING COMPANY DIV DEFENSE |
| BACB10A450 | 82918 | THE BOEING COMPANY DIV LEGACY WICHITA |
| BACB10AE2 | 81205 | THE BOEING COMPANY DIV DEFENSE |
| CVC700RE3F4 | 80378 | TRIUMPH AEROSTRUCTURES, LLC DBA TRIUMPH AEROSTRUCTURES - VOUGHT INTEGRATED PROGRAMS DIVISION |
| MS21153-3G | 0U583 | SAE INTERNATIONAL DBA SAE INTERNATIONAL |
| MS21153-3G | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| MS21153-3G | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
| RE3F4 | 21760 | SCHATZ BEARING CORPORATION DBA SCHATZ BEARING CORP |
| RE3F4 | 70413 | ANTI-FRICTION BEARING MFG ASSN INC THE |
| RE3F4 | 81965 | TRW INC BEARINGS DIV PLAINVILLE PLANT |
| RE3F4ANG25 | 21760 | SCHATZ BEARING CORPORATION DBA SCHATZ BEARING CORP |
| REP3F4-1 | 38443 | SKF USA INC. |
| REP3F4-3G | 73134 | ROLLER BEARING COMPANY OF AMERICA, INC. |
| REP3F4FS210 | 21335 | TIMKEN CO DIV THE TIMKEN COMPANY |
| REP3F4FS428 | 21335 | TIMKEN CO DIV THE TIMKEN COMPANY |
| REP3F4FS428 | 73134 | ROLLER BEARING COMPANY OF AMERICA, INC. |
What it pays — so you can quote
The government's own price and demand record for this NSN — what past awards cleared at, so you know where to land your quote.
Latest unit price
—
Purchases
0
Total spend
—
Sep 22, 2026
Last purchased
1 · 1.0/yr
Purchase records
$12,455
Total demand
$12,455
Latest award total
Purchase history
No priced purchases on record for this NSN yet.
Related contract actions
Contract action totals, not unit prices — obligation amounts from USAspending for related awards, shown for context only. These do not appear on the price chart above.
| Action date | Award # | Recipient | Agency | Obligation |
|---|---|---|---|---|
| Sep 22, 2026 | SPE4A626D5449/SPE4A626F487T ↗ | ROLLER BEARING COMPANY OF AMERICA, INC. | — | $12,455 |
Demand history
Who wins this item
Does one supplier win this every time, and are the winners on the listed-source list? One dot per award.
- Award in the last 2 years
- Older award
ROLLER BEARING COMPANY OF AMERICA, INC.
last award Sep 2026
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
no award yet
no awards on record
Listed source ANTI-FRICTION BEARING MFG ASSN INC THE
no award yet
no awards on record
Listed source E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
no award yet
no awards on record
Listed source LIEBHERR-AEROSPACE LINDENBERG GMBH
no award yet
no awards on record
Listed source MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
no award yet
no awards on record
Listed source SAE INTERNATIONAL DBA SAE INTERNATIONAL
no award yet
no awards on record
Listed source SATAIR A/S
no award yet
no awards on record
Listed source ROLLER BEARING COMPANY OF AMERICA, INC. won the only award on record.
Open RFQs on DIBBS → DIBBS award history ↗
About this data
- Unit prices: DLA DIBBS award records — every row links to its government record.
- AMSC: latest observed value from DIBBS solicitation history as of Oct 10, 2026.
- Contract action totals: USAspending, context only.
- Data last refreshed: 2026-09-27.
- Full methodology →
Cite this page
Citation
NSN Explorer. "BEARING,BALL,ROD END." nsnexplorer.com, https://nsnexplorer.com/nsn/3110-01-248-6246/. Data as of October 19, 2026.
Link
https://nsnexplorer.com/nsn/3110-01-248-6246/