# NSN 5905-00-053-9482: Resistor, Variable, Wire Wound, Non

NSN 5905-00-053-9482 (also written 5905000539482; NIIN 00-053-9482) is a resistor, variable, wire wound, non in Federal Supply Class 5905, Resistors. 8 manufacturer part numbers from 4 suppliers are on record. No purchases are on record yet.

## Identification

- NSN: 5905-00-053-9482 (5905000539482)
- NIIN: 00-053-9482 (000539482)
- Item name: RESISTOR,VARIABLE,WIRE WOUND,NON
- Federal Supply Class: [FSC 5905 Resistors](https://nsnexplorer.com/fsc/5905/)
- Federal Supply Group: [FSG 59](https://nsnexplorer.com/group/59/)
- Acquisition method suffix code: AMSC T: handled under qualified products list procedures. (observed 2026-10-23)
- Acquisition method code: 1

## Characteristics

| Code | Requirement | Reply |
| --- | --- | --- |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 340.0 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 6:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | HEAT SINK SINGLE SECTION 12.5 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.313 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.844 AND INCHES MAXIMUM 0.906 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.126 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.578 AND INCHES MAXIMUM 0.672 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.297 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 290.0 AND MAXIMUM 305.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | — |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 80.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.250 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.5 |
| AEDX | SHAFT STYLE | — |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 0.984 AND INCHES MAXIMUM 1.141 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22 TO 1 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.751 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |

## Part numbers

| Part number | CAGE | Supplier | Source |
| --- | --- | --- | --- |
| 0121-252K | 44655 | OHMITE HOLDING, L.L.C. DBA OHMITE MANUFACTURING | [flis](https://www.dla.mil/Portals/104/Documents/InformationOperations/LogisticsInformationServices/FOIA/PUBLOG/) |
| 06-0017 PIECE 5 | 20019 | WARD LEONARD CT LLC | [flis](https://www.dla.mil/Portals/104/Documents/InformationOperations/LogisticsInformationServices/FOIA/PUBLOG/) |
| 06-0017 PIECE 5 | 63743 | WARD LEONARD CT LLC | [flis](https://www.dla.mil/Portals/104/Documents/InformationOperations/LogisticsInformationServices/FOIA/PUBLOG/) |
| M22/01-00231SB | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | [flis](https://www.dla.mil/Portals/104/Documents/InformationOperations/LogisticsInformationServices/FOIA/PUBLOG/) |
| MIL-PRF-22/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | [flis](https://www.dla.mil/Portals/104/Documents/InformationOperations/LogisticsInformationServices/FOIA/PUBLOG/) |
| MILR22-1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | [flis](https://www.dla.mil/Portals/104/Documents/InformationOperations/LogisticsInformationServices/FOIA/PUBLOG/) |
| RES2K5 | 44655 | OHMITE HOLDING, L.L.C. DBA OHMITE MANUFACTURING | [flis](https://www.dla.mil/Portals/104/Documents/InformationOperations/LogisticsInformationServices/FOIA/PUBLOG/) |
| RP061SB252KK | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | [flis](https://www.dla.mil/Portals/104/Documents/InformationOperations/LogisticsInformationServices/FOIA/PUBLOG/) |

## Sources

- DLA DIBBS RFQs for this NSN: https://www.dibbs.bsm.dla.mil/RFQ/RFQNsn.aspx?value=5905000539482&category=nsn
- DLA DIBBS awards for this NSN: https://www.dibbs.bsm.dla.mil/Awards/AwdRecs.aspx?category=awdnsn&TypeSrch=cq&Value=5905000539482
- AMSC record: https://www.dla.mil/Portals/104/Documents/InformationOperations/LogisticsInformationServices/FOIA/PUBLOG/
- All data is public U.S. government data; every row above links to its source record where one exists.

Canonical page: https://nsnexplorer.com/nsn/5905-00-053-9482/
JSON: https://nsnexplorer.com/api/nsn/5905-00-053-9482.json