# NSN 5305-01-262-7885: Screw, Close Tolerance

NSN 5305-01-262-7885 (also written 5305012627885; NIIN 01-262-7885) is a screw, close tolerance in Federal Supply Class 5305, Screws. 1 manufacturer part number from 1 supplier is on record. It was last purchased in Oct 2026.

## Identification

- NSN: 5305-01-262-7885 (5305012627885)
- NIIN: 01-262-7885 (012627885)
- Item name: SCREW,CLOSE TOLERANCE
- Federal Supply Class: [FSC 5305 Screws](https://nsnexplorer.com/fsc/5305/)
- Federal Supply Group: [FSG 53](https://nsnexplorer.com/group/53/)
- Acquisition method suffix code: AMSC G: the government has a complete data package and the rights to use it. (observed 2026-10-10)
- Acquisition method code: 1

## Characteristics

| Code | Requirement | Reply |
| --- | --- | --- |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.352 AND INCHES MAXIMUM 0.403 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.164 AND INCHES MAXIMUM 2.184 |
| AASK | HEAD STYLE | — |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.189 AND INCHES MAXIMUM 0.204 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.564 |
| AAUM | LOCKING FEATURE | GRIP DETENT BALL |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3737 AND INCHES MAXIMUM 0.3742 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.116 |
| ABQZ | INTERNAL DRIVE STYLE | — |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.625 AND INCHES MAXIMUM 1.641 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 63000 |
| CQFM | HARDNESS RATING | LOCKING FEATURE ROCKWELL C MINIMUM 50.0 AND ROCKWELL C MAXIMUM 62.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 2.036 AND INCHES MAXIMUM 2.056 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| MATT | MATERIAL | LOCKING FEATURE STEEL CORROSION RESISTING |
| MATT | MATERIAL | SPRING STEEL COMP 631 OR STEEL COMP 302 |
| MATT | MATERIAL | FASTENER STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LOCKING FEATURE FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FASTENER ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SPRING ASSN STD 1ST MATERIAL RESPONSE A-S 5673 OR ASSN STD 2ND MATERIAL RESPONSE AST- A580 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |

## Part numbers

| Part number | CAGE | Supplier | Source |
| --- | --- | --- | --- |
| MS3369B-626 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | [flis](https://www.dla.mil/Portals/104/Documents/InformationOperations/LogisticsInformationServices/FOIA/PUBLOG/) |

## Contract awards

Newest first.

| Date | Award | Description | Recipient | Amount |
| --- | --- | --- | --- | --- |
| 2026-10-15 | [SPE4A627P1762](https://www.dibbs.bsm.dla.mil/Awards/AwdRecs.aspx?category=awdnsn&TypeSrch=cq&Value=5305012627885) | SCREW, CLOSE TOLERAN | — | $17,620.40 |

## Sources

- DLA DIBBS RFQs for this NSN: https://www.dibbs.bsm.dla.mil/RFQ/RFQNsn.aspx?value=5305012627885&category=nsn
- DLA DIBBS awards for this NSN: https://www.dibbs.bsm.dla.mil/Awards/AwdRecs.aspx?category=awdnsn&TypeSrch=cq&Value=5305012627885
- AMSC record: https://www.dla.mil/Portals/104/Documents/InformationOperations/LogisticsInformationServices/FOIA/PUBLOG/
- USAspending contract actions (each award above links to its record)
- All data is public U.S. government data; every row above links to its source record where one exists.

Canonical page: https://nsnexplorer.com/nsn/5305-01-262-7885/
JSON: https://nsnexplorer.com/api/nsn/5305-01-262-7885.json